Ultra-Mini Sprayer
• ULTRA-MINI SPRAYERS (PN 4122, 4134, 4138)
• REPLACEMENT CARTRIDGES (PN 4126, 4135, 4139)
®
  • 1. Use appropriate PPE (gloves, respirator, goggles, paint suit, etc.)
  • 2. Prepare and clean surfaces prior to coating for better adhesion
  • 3. Shake or mechanically mix the Bottom Coat for 5-10 minutes prior to application
  • 4. For convenience, the Ultra-Mini Sprayer is sold in two-packs, so you can
  • use one for the Bottom Coat and one for the Top Coat
  • 5. Apply thin, even coats - do not pool the coating
  • 6. Allow the Bottom Coat to dry for at least 30 minutes before applying the Top
  • Coat (do not apply Top Coat if the Bottom Coat is still wet)
  • 7. Clean the Ultra-Mini Sprayer by spraying a small amount of xylene into
  • a rag or waste container and allow the sprayer to dry before reusing the
  • sprayer
  • 8. Shake or mechanically mix the Top Coat for 3-5 minutes prior to application
  • 9. Allow the Top Coat to dry for at least 30 minutes prior to challenging with
  • liquid - allowing the Top Coat to dry longer (even overnight) can improve
  • results
  • 10. Clean the Ultra-Mini Sprayer by spraying a small amount of xylene into
  • a rag or waste container and allow the sprayer to dry before reusing the
  • sprayer
  • 11. Dispose of xylene and cleaning materials according to local regulations
  • 12. If the Ultra-Mini Sprayer clogs during application, the fi lter at the bottom of
  • the dip tube can be removed
  • 13. If the Ultra-Mini Sprayer clogs after the fi lter is removed, the sprayer can be
  • back-fl owed by depressing the trigger while the nozzle is covered
  • 14. Refer to the specifi c instructions for Ultra-Ever Dry and the Ultra-Mini
  • Sprayer (inside panels of the box) for more detailed information

  • Quick Start Guide for Ultra-Ever Dry
  • 1-904-292-1611
  • 1-800-353-1611
  • 11542 Davis Creek Court, Jacksonville, Florida 32256 USA
  • UltraTech International, Inc.
  • www.UltraEverDry.com